HP 316095-B21 - StorageWorks Edge Switch 2/24 Reference Manual page 188

Error Messages
Message
Error 232: Invalid
Domain ID
Error 233: Invalid
Member
Error 234: Invalid
Command
A–24
Description
The value specified for the
domainId parameter is
invalid. For example, the
domainId parameter of the
config.switch.prefDo
mainId command requires
an integer in the range
1–31.
The value specified for the
zoneName parameter (the
name of the zone member)
is invalid.
The CLI cannot associate
an action with the submitted
command. The command
may be misspelled, required
parameters may be missing,
or the request may not be
applicable to the branch of
the CLI tree from which it
was submitted.
CLI reference guide for directors and edge switches
Action
Chapter 2
Refer to for
information about the
commands with the
domainId parameter.
Specify a valid domain ID
value, and resubmit the
command.
Chapter 2
Refer to for
information about the
commands with the
zoneName parameter.
Specify a valid name for
the zone member, and
resubmit the command.
Chapter 2
Refer to for the
correct command syntax
and spelling. Ensure that
the command is spelled
correctly and that all
required parameters are
included with the
command.
Navigation of
Refer to
the CLI Command Tree
on page 1–7
. Ensure that
the command has been
entered at the right place
in the CLI command tree,
and then resubmit the
command.