Config.port.fan - HP 316095-B21 - StorageWorks Edge Switch 2/24 Reference Manual

config.port.fan

Syntax
fan portNumber fanOn
Purpose
This command sets the fabric address notification (FAN) state for a port (Edge Switch
2/24 only). This configuration can be applied to any port regardless of its current
configuration. The FAN value is applied at the time the port is configured and
operated in a loop.
Parameters
This command has two required parameters:
portNumber
fanOn
Command Examples
Root> config port fan 4 1
CLI reference guide for directors and edge switches
Specifies the port number. Valid values are:
0–23 for the Edge Switch 2/24
Specifies the FAN state for the port. Valid values
are true and false.
Boolean 1 and 0 may be substituted as values.
CLI Commands
2–15