Config.zoning.addzone - HP 316095-B21 - StorageWorks Edge Switch 2/24 Reference Manual

CLI Commands

config.zoning.addZone

Syntax
addZone "zoneName"
Purpose
This command adds a new (empty) zone to the zone set in the work area.
Description
Changes are not activated on the Switch until the
config.zoning.activateZoneSet command is issued. The CLI supports the
number of zones per zone set specified for a given product.
Parameters
This command has one parameter:
zoneName Specifies the name of the new zone.
Command Example
Root> config zoning addZone TheUltimateZone
2–70
The zoneName must contain 1–64 characters.
Valid characters are:
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrs
tuvwxyz0123456789$-^_
Spaces are not permitted, and the first character must be
alphabetical.
CLI reference guide for directors and edge switches