Installing And Removing Intel I/O Expansion Module; Installing Intel ® I/O Expansion Module; Figure 52. Removing The Slimline Optical Drive; Figure 53. Installing Intel ® I/O Expansion Module - Intel R1000BB Family Service Manual

4. If no device will be installed in this location, install a filler panel in this location.
Installing and Removing Intel
Installing Intel
1. Squeeze the sides of the filler panel to disengage it from the server system back panel and
remove it (see letter "A").
2. Position the module over the server board, fit the front of the module into the back panel slot
(see letter "B").
3. Attach the module to the server board connector (see letter "C").
4. Secure the module with the three screws as shown (see letter "D").
®
Intel Server System R1000BB Service Guide

Figure 52. Removing the Slimline Optical Drive

®
I/O Expansion Module
5.
Figure 53. Installing Intel
Hardware Installations and Upgrades
®
I/O Expansion Module
®
I/O Expansion Module
33