Installing And Removing Intel I/O Expansion Module; Installing Intel I/O Expansion Module; Figure 52. Removing The Slimline Optical Drive; Figure 53. Installing Intel ® I/O Expansion Module - Intel Server System R1000GZ Service Manual

Hide thumbs Also See for Server System R1000GZ:

Table of Contents

Hardware Installations and Upgrades

4. If no device will be installed in this location, install a filler panel in this location.

Installing and Removing Intel

Installing Intel

1. Squeeze the sides of the filler panel to disengage it from the server system back panel and

remove it (see letter "A").

2. Position the module over the server board, fit the front of the module into the back panel slot

(see letter "B").

3. Attach the module to the server board connector (see letter "C").

4. Secure the module with the three screws as shown (see letter "D").

I/O Expansion Module

Figure 53. Installing Intel

I/O Expansion Module

®®

Intel

Server System R1000GZ/GL Service Guide

Table of Contents

Need help?

Do you have a question about the Server System R1000GZ and is the answer not in the manual?

Server system r1000gl