Security Settings - HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual

Figure 8-2
The parameters in each section of the Security page are described below.

Security Settings

This section on the Security page provides similar information that is located on the standard HP
Jetdirect configuration page. See the table below.
Table 8-13 Security Settings
Message
802.1X
IPsec:
138 Chapter 8 HP Jetdirect Configuration Pages
HP Jetdirect Security Page (635n)
Description
Identifies whether the print server has been configured with EAP/802.1X client
authentication settings.
Specified: 802.1X authentication has been configured.
Not Specified: 802.1X authentication has not been configured.
Provides the print server's current IPsec status.
Enabled: IPsec is enabled and operating as configured by the user.
Disabled: IPsec is turned off.
ENWW