Ipv6 Section; Ipx/Spx Protocol Information - HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual

Table 8-6 IPv4 Section (continued)
Message
or
RARP SERVER:
BOOTP/DHCP SERVER:
TFTP SERVER:
WEB JETADMIN URL:
MDNS SERVICE NAME

IPv6 Section

The following table includes items displayed under the IPv6 section of the configuration page.
Table 8-7 IPv6 Section
Message
LINK-LOCAL:
STATELESS:
DHCPV6:
MANUAL:

IPX/SPX Protocol Information

Information in this section of the Jetdirect configuration page is described in
Configuration
ENWW
Description
Displayed during initialization while the HP Jetdirect print server attempts to obtain its
TCP/IP configuration from a BOOTP or DHCP server. The temporary address
displayed is 0.0.0.0.
The IP address of the system where the TFTP configuration file is located. During
initialization, the temporary address 0.0.0.0 is displayed.
Not Specified: Indicates that a TFTP server has not been not been set.
If the HP Jetdirect print server is found on the network by HP Web Jetadmin, the
URL of the host system used for HP Web Jetadmin services is displayed. The URL is
limited to two lines and may be truncated.
Not Specified: Indicates that the URL of the Web Jetadmin host system could not be
identified or is not configured.
Specifies a name (alphanumeric string) assigned to this device or service. This name
is persistent and is used to resolve a particular device or service if socket information
(such as the IP address) changes from session to session. Apple mDNS will display
this service. The default service name is the printer model and the LAN Hardware
(MAC) address.
Description
Specifies the IPv6 Link Local address configured on the print server.
Not Configured: A link local address has not been configured.
Specifies IPv6 Stateless addresses configured on the print server.
Not Configured: A Stateless address has not been configured.
Specifies the print server IPv6 stateful address configured by a DHCPv6 server.
Not Configured: A stateful address has not been configured.
Specifies an IPv6 address manually configured on the print server, for example,
through the printer control panel or the embedded Web server.
Not Configured: An address has not been manually configured.
Information. For error messages, see Table 8-12 Error Messages.
HP Jetdirect Configuration Page
Table 8-8 IPX/SPX
127