Dlc/Llc Protocol Information; Error Messages - HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual

Table 8-10 AppleTalk Configuration Information (continued)
Message
NAME:
ZONE:
TYPE:
NETWORK NUMBER:
NODE NUMBER:

DLC/LLC Protocol Information

Information in this section of the Jetdirect configuration page is described in
Configuration
Table 8-11 DLC/LLC Configuration Information
Message
STATUS:

Error Messages

Error codes and messages that may appear in the Status sections of the Jetdirect configuration page
are described in
130 Chapter 8 HP Jetdirect Configuration Pages
Description
READY: Indicates the HP Jetdirect print server is awaiting data.
DISABLED: Indicates that AppleTalk was manually disabled.
INITIALIZING: Indicates that the print server is registering the node address or
name. An additional status message may also be displayed.
An error code and message is displayed if the print server is not ready. For more
information, see
The name of the printer on the AppleTalk network. A number after the name
indicates that there are multiple devices with this name, and this is the Nth instance
of the name.
The name of the AppleTalk network zone on which the printer is located.
The type of the printer being advertised on the network. Two types can be displayed.
NETWORK NUMBER: Identifies the AppleTalk Network Number on which the HP
Jetdirect print server is currently operating.
NODE NUMBER: Identifies the AppleTalk Node Number that the print server chose
for itself as part of its initialization sequence.
Information.
Description
Indicates the current DLC/LLC protocol status.
READY: Indicates the HP Jetdirect print server is awaiting data.
DISABLED: Indicates that DLC/LLC was manually disabled.
INITIALIZING: Indicates that the print server is registering the node address or
name. An additional status message may also be displayed.
An error code and message is displayed if the print server is not ready. For more
information, see
Table 8-12 Error Messages.
Table 8-12 Error Messages.
NOTE The AppleTalk phase 2 (P2) parameter is preconfigured on the HP
Jetdirect print server.
Table 8-12 Error Messages.
Table 8-11 DLC/LLC
ENWW