Support Info; Refresh Rate; Privacy Settings; Select Language - HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual

First, set up the print queue:
■ Name a string: Type "reset_string" into the String Name field in row 1.
■ Define the string's value: Type "\1BE" (Escape-E) into the Value field in row 1. (Alternatively, you
could type "\1B\45".)
■ Name the queue: Type "clear_printer" into the Queue Name field in row 5.
■ Set up the prepend string: Type "reset_string" into the Prepend String field in row 5.
■ Leave the Append String field in row 5 blank.
■ Set the queue type: Using the pull-down menu, set the Queue Type field in row 5 to "RAW".
Then, set up the printer to use the queue, making sure to specify "clear_printer" when asked for a
queue name. (For details of setting up the printer, refer to
sent to the printer—either from the server or from a client computer that has set up that printer—will
include a reset command at the beginning of the job.

Support Info

Use this page to configure links for Support assistance. You can designate a Support person and
phone number of an administrator for this device, as well as URL addresses for Web-based product
and technical support.

Refresh Rate

The refresh rate is the time period (in seconds) that the diagnostic pages will be automatically
updated. The value '0' disables the refresh rate.

Privacy Settings

On the Privacy Settings page, you can allow the embedded Web server to collect product
identification and use information and then send the information to HP (Internet access is required).
Product use information assists HP in improving product features and services. The default setting
for this page will depend on the user's selection on initial access to the Networking tab.
To enable this feature, check the checkbox and click Apply.
To disable this feature, clear the checkbox and click Apply.

Select Language

This link appears if the HP Jetdirect Web pages support multiple languages. Supported languages
may also be selected through language preference settings in your browser (see your browser's Help).
To display supported non-English languages, the use of cookies must be enabled in your browser
settings.

Security: Settings

In the SECURITY section, the Settings menu provides access to the following tabs: Status (default),
Wizard, Restore Defaults. The available settings depend on your particular print server model.
ENWW
LPD Printing.) After that, any print jobs
Networking Tab 83