Ipsec Rules; Ipsec Sa Table; Available Network Services - HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual

Message
Rekeys:
IKE Connections OK (1/Q):

IPsec Rules

This section of the Security page identifies the IPsec Policy of the print server. The IPsec Policy
consists of rules that control the security of the traffic received and transmitted by the print server.
Rules are configured using an IPsec configuration wizard accessed through the print server's
embedded Web server. Up to ten rules can be configured.
The heading of this section will indicate the default rule for IPsec traffic:
■ Pass: The default IPsec rule is configured to allow all non-IPsec traffic.
■ Drop: The default IPsec rule is configured to drop all non-IPsec traffic.
For each rule configured, the names of the IP address template, service template, and IPsec
template that define the rule will be displayed. For more information, see

IPsec SA Table

The IPsec SA Table lists the Security Associations (SA) of cached IPsec sessions between two
hosts. While the number of active sessions may be large, the number of security associations listed
in the table is limited to eight.
Table 8-15 IPsec Security Associations
Message
SA Pair #:
Protocol:
SRC:
DST:
In:
Out:
Dropped:

Available Network Services

This section of the Security page is used to list the well-known ports of Jetdirect services being
accessed. A remote port is one associated with a remote client application, while a local port
identifies a service and port number on the HP Jetdirect print server. In addition, a port may be
identified as secure or not secure depending on the IPsec policy configuration.
ENWW
Description
Displays the number of times keys have been regenerated (for example, after a key
lifetime setting has been exceeded and then regenerated).
Displays the number of successful IPsec connections for both Phase 1 and Quick
Mode attempts, separated by a slash (Phase 1 count / Quick Mode count).
Description
A table entry number for a Security Association pair. Up to eight entries will be
displayed.
Displays the protocol used by the hosts: TCP, UDP, or ICMP.
Displays the IP address of the host that initiates the IPsec traffic.
Displays the IP address of the host that receives the IPsec traffic.
Displays the number of IPsec packets received, transmitted, or dropped by the print
server.
IPsec Configuration.
Security Configuration Page 141