Renaming The Printer - HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual

Running the HP LaserJet Utility
1 With the printer turned on and online, and the print server connected to the printer and to the
network, double-click the HP LaserJet Utility icon.
2 If the printer's name is not listed as the target printer, click Select Printer. The Select a Target
Printer window appears.
● Select the zone, if necessary, from the AppleTalk Zones list in which the printer resides. The
zone the printer is in is shown on the configuration page. See the hardware installation guide
for your print server or your printer's Getting Started guide for instructions on printing a
configuration page.
● Select the printer from the Available Printers list and click OK.
Verifying Network Configuration
To verify your current network configuration, print a Jetdirect configuration page. If you have not
printed a configuration page from your printer, see your printer documentation for instructions (see
HP Jetdirect Configuration Pages
sure a READY message appears on the control panel for at least 1 minute, then print the page. The
current configuration is listed under "AppleTalk" on the configuration page.
NOTE
to identify the printer's name and zone.

Renaming the Printer

The factory supplies a default name for your printer. Hewlett-Packard highly recommends that
you rename your printer to avoid having multiple printers with similar names on your network.
CAUTION
use caution when changing the printer name again. If you rename the printer again, the
queues for that printer will no longer function.
NOTE
illegal character was typed. For illegal characters, see the Help system integrated with the
software.
You can name your printer anything you like—for example, "Michael's LaserJet 4000." The HP
LaserJet Utility has the ability to rename devices located in different zones, as well as the local zone
(no zones need to be present in order to use the HP LaserJet Utility).
1 Select the Settings icon from the scrolling icon list. The Please select a setting: dialog appears.
2 Select Printer Name in the list.
3 Click Edit. The Set Printer Name dialog box appears.
4 Type the new name.
5 Click OK.
14 Chapter 2 HP Software Solutions Summary
for more information). If your printer has a control panel, make
If you have multiple printers on your network, you need to print a configuration page
After you have renamed the printer and have set up print queues to that printer,
The name may be up to 32 characters in length. A warning beep indicates that an
ENWW