HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual page 144

Table 8-12 Error Messages (continued)
Error Code and Message
26 UNKNOWN NCP RETURN
CODE
27 UNEXPECTED PSERVER
DATA RCVD
28 OUT OF BUFFERS
29 UNABLE TO SENSE NET
NUMBER
2A NDS ERR: EXCEEDS MAX
SERVERS
2B NDS ERR: UNABLE TO LOGIN
2C NDS AUTHENTICATION
ERROR
2D NDS ERR: CHANGE PSSWRD
FAILED
2E NDS SERVER PUBLIC KEY
ERROR
2F NDS ERR: SRVR NAME
UNRESOLVD
30 NDS PRINT SERVER NAME
ERROR
31 NDS PS PRINTER LIST ERROR
32 NDS PRINTER OBJ NOTIFY
ERR
33 NDS PRINT OBJ QUEUE LIST
ERR
34 NDS ERR: UNRESOLVD
PRNTR OBJ
35 NDS ERR: INVALID SRVR VERS The current version of the NetWare file server is not supported.
36 NDS ERR: NO PRINTER
OBJECTS
37 NDS ERR: MAX PRINT
OBJECTS
38 NDS ERR: NO QUEUE OBJECTS No print queue objects are assigned to the printer objects located in the NDS
39 NDS ERR: MAX QUEUE
OBJECTS
134 Chapter 8 HP Jetdirect Configuration Pages
Description
The HP Jetdirect print server encountered an unexpected fatal error after it had
successfully connected to the file server. A wide variety of failures could produce this
error message, including a downed file server or a network router failure.
The print server sent some data when the HP Jetdirect print server had not given its
permission to do so. This indicates a possible print server problem, possibly a
software problem.
The HP Jetdirect print server was unable to allocate a buffer from its internal
memory. This indicates all buffers are busy due possibly to heavy broadcast traffic or
large amounts of network traffic directed to the print server.
The HP Jetdirect print server has been trying for over 3 minutes to determine the
NetWare protocol used on the network. Make sure that any file servers and routers
are operating correctly. Make sure that the settings for NetWare frame type and
source routing are correct.
More queues were assigned than the HP Jetdirect print server can handle. Remove
one or more print queues from the list to be serviced by Queue Server Mode.
Unable to log onto the NetWare directory tree. Make sure that the print server object
is defined in the directory at the correct context. Clear the print server password
using NWADMIN or similar NetWare tool.
Unable to log onto the NetWare directory tree. Make sure that the print server object
is defined in the directory at the correct context.
Cannot modify the print server password to the value expected by the HP Jetdirect
print server.
Print Server Object Name mismatch. Unable to read the file server's public key.
Verify object names, or contact the NDS administrator.
The file server on the network cannot be located. The server may not be running at
this time or a communications problem may exist.
The HP Jetdirect print server object cannot be located in the specified NDS context.
Cannot locate a list of printers objects that should be assigned to the print server
object.
The list of notification objects assigned to the printer object cannot be located.
The list of print queues assigned to the printer objects cannot be located.
The printer object cannot be located in the NDS directory.
No printer objects are assigned to the print server object configured to this HP
Jetdirect print server.
Too many printer objects are assigned to the print server object. Using NetWare
utilities (such as NWADMIN), reduce the number of printer objects assigned to the
print server.
directory.
Too many print queue objects are assigned to the printer. Reduce the number of
queues assigned.
ENWW