HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual page 40

Jetdirect print servers
Hide thumbs Also See for 635n - JetDirect IPv6/IPsec Print Server:
Table of Contents

Advertisement

Table 3-2
TFTP Configuration File Parameters (continued)
ftp-printing:
Enables or disables the ability to print through FTP: 0 disables, 1 (default) enables.
ipp-printing:
Enables or disables the ability to print through IPP: 0 disables, 1 (default) enables.
lpd-printing:
Enables or disables LPD (Line Printer Daemon) printing services on the Jetdirect print server. 0 disables, 1 (default)
enables.
banner:
A port-specific parameter that specifies printing an LPD banner page. 0 disables banner pages. 1 (default) enables
banner pages.
interlock:
(or interlock-mode:)
Specifies whether an acknowledgement (ACK) on all TCP packets is required before the printer is allowed to close a
Port 9100 print connection. A Port Number and Option value are specified. For current HP Jetdirect print servers, the
Port Number is 1. Option value 0 (default) disables interlock, 1 enables. For example, "interlock 1 1" specifies Port 1,
interlock enabled.
buffer-packing:
Enables or disables buffer packing for TCP/IP packets.
0 (default): is normal, the data buffer is packed before sending to the printer.
1: disables buffer packing, data is sent to the printer as it is received.
write-mode:
Controls the setting of the TCP PSH flag for device-to-client data transfers.
0 (default): disables this option, flag is not set.
1: all-push option. The push bit is set in all data packets.
mult-tcp-conn:
Enables or disables multiple TCP connections.
0 (default): allows multiple connections.
1: disables multiple connections.
TCP/IP Raw Print Ports
raw-port:
(or addrawport:)
Specifies additional ports for printing to TCP port 9100. Valid ports are 3000 to 9000, which are application-dependent.
TCP/IP Access Control
allow: netnum [mask]
Makes an entry into the host access list stored on the HP Jetdirect print server. Each entry specifies a host or network
of hosts that are allowed to connect to the printer. The format is "allow: netnum [mask]" where netnum is a network
30
Chapter 3
TCP/IP Configuration
(or ftp-config:, ftp:)
(or ipp-config:, ipp:)
(or lpd-config:, lpd:)
(or packing:)
ENWW

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 635n - JetDirect IPv6/IPsec Print Server and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

635n

Table of Contents