Security Settings - HP Ew2400 - JetDirect Print Server Administrator's Manual

Security Settings

Information in this section of the Jetdirect configuration page is
described in Table
Table 9.4 Security Settings (1 of 3)
Message
802.1X
Admin Password:
SSL/TLS
Cert Expires:
ENWW
9.4.
Description
Identifies whether the print server has been configured with
EAP/802.1X client authentication settings.
Specified: 802.1X authentication has been configured.
Not Specified: 802.1X authentication has not been
configured.
Specifies whether an IP Administrator password has been
configured on the print server. This password is shared by
Telnet, the embedded Web server, and HP Web Jetadmin
to control access to print server configuration parameters.
Up to 16 case-sensitive, alphanumeric characters can be
used.
Not Set: An Administrator password has not been set.
Set: An Administrator password has been set.
(The password may be cleared from the print server through
a cold reset.)
Status of Secure Sockets Layer/Transport Layer Security
(SSL/TLS) protocols.
Disabled: SSL/TLS is disabled.
<certificate string>: A character string that identifies the
certificate common name.
Specifies the expiration date of the digital certificate for
SSL/TLS encrypted security. The date is in UTC format (for
example, "2002-10-02 12:45 UTC").
Not Applicable: Displayed if a digital certificate has not been
installed.
HP Jetdirect Configuration Page 211