Ending The Ftp Session; Commands - HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual

Figure B-1
If the connection is successful, a Ready message will be displayed.
After a successful connection, the user is prompted for a login name and password. The default is
the client's login name. The Jetdirect FTP server will allow any user name. Passwords are ignored.
If login is successful, a message "230" will be displayed on the client system. In addition, the
available HP Jetdirect ports for printing will be displayed. HP Jetdirect print servers supported in this
guide provide a single port (Port 1). For a typical FTP printing session, see
Session."

Ending the FTP Session

To end an FTP session, type quit or bye.
NOTE
data connection is closed.

Commands

The following table summarizes commands available to the user during an FTP printing session.
Table B-1 User Commands for HP Jetdirect FTP Server
Command
user <username>
cd <port#>
cd /
quit
ENWW
FTP Login Example
Prior to ending an FTP session, a Ctrl C command is recommended to ensure the
Description
<username> specifies a user. Any user will be accepted and can print to the
selected port.
<port#> selects a port number for printing. For supported HP Jetdirect embedded
print servers, only port1 is available.
/ specifies the root directory of the HP Jetdirect FTP server.
quit or bye terminates the FTP session with the HP Jetdirect print server.
"Example of an FTP
Using FTP Printing 159