HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual page 39

Table 3-2 TFTP Configuration File Parameters (continued)
ssl-state: (or ssl-redirect-config)
■ Sets the print server's security level for Web communications:
1: Forced redirection to the HTTPS port. Only HTTPS (secure HTTP) communications can be used.
2: Disable forced redirection to HTTPS. Both HTTP and HTTPS communications can be used.
security-reset:
■ Reset security settings on the print server to factory default values. 0 (default) does not reset, 1 resets the security
settings.
TCP/IP Main
host-name:
■ Specifies the node name that will appear on the Jetdirect configuration page. Default is NPIxxxxxx, where xxxxxx is the
last six digits of the LAN hardware address.
parm-file:
■ Specifies the path and file name whose contents are sent to the printer for printing each time the print server is powered
on. The path and filename entry is limited to 64 alphanumeric characters.
domain-name:
■ The domain name for the device (for example, support.hp.com). It does not include the host name; it is not the Fully
Qualified Domain Name (such as printer1.support.hp.com).
pri-dns-svr:
■ The IP address of the DNS (Domain Name System) server.
sec-dns-svr:
■ The IP address of a secondary DNS server to use if the primary DNS server is unavailable.
pri-wins-svr:
■ The IP address of the primary Windows Internet Naming Service (WINS) server.
sec-wins-svr:
■ The IP address of the secondary Windows Internet Naming Service (WINS) server.
smtp-svr:
■ The IP address of the outgoing e-mail Simple Mail Transport Protocol (SMTP) server, for use with supported Scan
devices.
TCP/IP Print Options
9100-printing:
■ Enables or disables printing to TCP port 9100 on the print server. 0 disables, 1 (default) enables.
ENWW
(or sys-name:, name:)
(or dns-srv:)
(or pri-wins-srv:)
(or sec-wins-srv:)
(or 9100-config:)
IPv4 Configuration 29