Appletalk Protocol Information - HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual

Table 8-9 Novell NetWare Configuration Information (continued)
Message
NODE NAME:
NETWARE MODE:
NDS TREE NAME:
NDS CONTEXT:
ATTACHED SERVER:
QUEUE POLL INTERVAL
SAP INTERVAL:
SERVER x:

AppleTalk Protocol Information

Information in this section of the Jetdirect configuration page (Ethernet Only) is described in
8-10 AppleTalk Configuration
Table 8-10 AppleTalk Configuration Information
Message
STATUS:
ENWW
Description
INITIALIZING: Indicates that the print server is registering the node address or
name. An additional status message may also be displayed.
An error code and message is displayed if the print server is not ready. For more
information, see Table 8-12 Error
Queue Server Mode: The print server name. This name must match a valid print
server on the appropriate NetWare file server. The default name is NPIXXXXXX,
where XXXXXX is the last six digits of the LAN hardware (MAC) address.
Remote Printer Mode: The name you gave the network printer when you configured
the network printer. The default name is NPIXXXXXX.
The mode used by the HP Jetdirect print server.
QUEUE SERVER: Indicates that the print server receives data directly from the
queue.
REMOTE PRINTER (followed by the printer number): Indicates that the print server
emulates a Novell NetWare remote printer.
If the printer is not configured, this field displays QUEUE SERVER.
Displays the name of the Novell Directory Services (NDS) tree for this printer. NDS is
a database of objects on a NetWare network organized in a hierarchical tree structure.
Not Specified or blank: NDS is disabled.
Displays the fully qualified NDS name where the HP Jetdirect print server object
resides in the NDS tree. For example:
CN=lj_pserver.OU=support.OU=mycity.OU=mycompany
Not Specified or blank: NDS is disabled.
The Attached Server field identifies the Jetdirect discovery method [NSQ] (Nearest
Service Query) or [GSQ] (General Service Query) and the name of the proxy file
server used to locate the configured bindery servers.
Not Specified or blank: A NetWare server has not been configured.
(Job Poll Interval) Specifies the time interval (seconds) that the HP Jetdirect print
server waits to check for print jobs in a print queue. The default is 2 seconds.
Specifies the time interval (seconds) that the HP Jetdirect print server waits between
Service Advertising Protocol (SAP) broadcasts on the network. The default is 60
seconds.
Identifies a NetWare file server to which the HP Jetdirect print server is attached.
Information. For error messages, see
Description
Indicates the current AppleTalk configuration status.
Messages.
Table 8-12 Error
HP Jetdirect Configuration Page
Table
Messages.
129