Printing A Test File - HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual

5 Select Add a Remote Printer from the Actions list, then select a printer name.
Examples: my_printer or printer1
6 Select a remote system name.
Example: jetdirect1 (node name of the HP Jetdirect print server)
7 Select a remote printer name.
Type text for ASCII or raw for PostScript, PCL, or HP-GL/2.
Type auto to let the line printer daemon select automatically.
Type binps to instruct the PostScript interpreter to interpret the print job as binary PostScript
data.
Type the name of a user-defined queue to include pre-defined strings before and/or after the
print data (user-defined print queues can be set up through Telnet,
Summary, and the embedded Web server,
8 Check for a remote printer on a BSD system. You must type Y.
9 Click OK at the bottom of the menu. If the configuration is successful, the program prints the
message:
The printer has been added and is ready to accept print requests.
10 Click OK and select Exit from the List menu.
11 Select Exit Sam.
NOTE
set up your print queues.

Printing a Test File

To verify that the printer and print server connections are correct, print a test file.
1 At the UNIX system prompt type:
lpr -Pprinter_name file_name
where printer_name is the designated printer and file_name refers to the file to be printed.
Examples (for BSD-based systems):
Text File: lpr -Ptext1 textfile
PCL File: lpr -Praw1 pclfile.pcl
PostScript File: lpr -Praw1 psfile.ps
HP-GL/2 File: lpr -Praw1 hpglfile.hpg
For HP-UX systems, substitute lp -d for lpr -P.
2 To get print status, type the following at the UNIX prompt:
148 Appendix A LPD Printing
By default, the lpsched is not running. Make sure you turn the scheduler on when you
HP Jetdirect Embedded Web Server
HP Software Solutions
(V.31.xx)).
ENWW