HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual page 26

5 Select the printer name you want to use from the list of printer names in the upper-right area of
the Chooser. If the printer's name does not appear in the list, make sure the following tasks have
been performed:
● the printer is turned on and is online.
● the print server is connected to the printer and to the network.
● the printer cable connections are secure.
A READY message should appear if the printer has a control panel display. See
the HP Jetdirect Print Server
NOTE
it. Your printer remains selected until you select a different printer with the Chooser.
6 Click Setup or Create in the Chooser; then, if prompted, select the appropriate PostScript Printer
Description file (PPD) for the printer. For more information, see the online documentation.
7 Set Background Printing to ON or OFF.
If background printing is turned OFF when you send a print job to the printer, status messages
appear on your screen and you have to wait until the messages clear before continuing your
work. If background printing is turned ON, the messages are redirected to the PrintMonitor and
you can continue working while the printer is printing your job.
8 Exit the Chooser.
To display your user name on the network when you are printing documents, go into the Control
Panel on your Mac OS computer, select Sharing Setup, then type your owner name.
Testing the Configuration
1 Select Print Window from the File menu, or if no window is open, select Print Desktop.
The Print dialog box appears.
2 Click Print.
If the printer prints the job, you have connected your printer to your network correctly. If your
printer does not print, see
16 Chapter 2 HP Software Solutions Summary
for more information.
If your printer is the only name listed in the dialog box, you must still select
Troubleshooting the HP Jetdirect Print
Troubleshooting
Server.
ENWW