HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual page 66

Table 3-3 Telnet Commands and Parameters (continued)
Support
Web JetAdmin URL
Web JetAdmin Name
support-contact
support-number
support-url
tech-support-url
Menu Interface
An optional Menu interface is displayed when you type menu at the Telnet command prompt. The
Menu interface eliminates the need to memorize commands, and provides structured menu lists for
easy access to configuration parameters.
Figure 3-1 Example: Using the Menu Interface
menus as an example.
■ From the Main Menu screen, select and enter a menu number. If there are submenus, select
and enter a submenu number.
■ If you want to change a parameter setting, enter "Y" (for "Yes") when prompted.
Changes to parameters are made by editing the setting through the use of the
an unrecognized value is entered, the correct entry options will be displayed.
NOTE
prompted, choose to save your changes.
56 Chapter 3 TCP/IP Configuration
100HALF: 100 Mbps, half-duplex operation.
10FULL: 10 Mbps, Full-duplex operation.
10HALF: 10 Mbps, half-duplex operation.
(Read-only parameter) If HP Web Jetadmin discovers this device, the URL to access
HP Web Jetadmin will be specified.
(Read-only parameter) If HP Web Jetadmin discovers this device, the name of the HP
Web Jetadmin host will be specified (if known).
Typically used to identify the name of a person to contact for support of this device.
Typically used to specify a phone or extension number to call for support of this device.
A Web URL address for product information on this device over the Internet or an
intranet.
A Web URL address for technical support over the Internet or an intranet.
Changes are not saved on the Jetdirect print server until you exit a menu and, when
illustrates the Menu interface, using the TCP/IP
Backspace key. If
ENWW