Step 1-Specify An Address Template; Create Address Template; Step 2-Specify Service Template - HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual

HP Jetdirect
IPsec Policy
Figure 5-2

Step 1-Specify an Address Template

The available address templates for which a rule will apply are listed in the Address Templates field
by name. Select a predefined template, or click New to create a custom template using the Create
Address Template page, decribed below.
To view or delete a template in the list, select it and click View or Delete.
After an address template has been selected, click Next.

Create Address Template

Items on the Create Address Template page are described below.
Table 5-2 Create Address Template page
Item
Address Template Name
Local Address
Remote Address

Step 2-Specify Service Template

The available service templates for which a rule will apply are listed in the Service Templates field
by name. Select a predefined template, or click New to create a custom template using the Create
Service Template page, described below.
100 Chapter 5 IPsec Configuration
IPsec
Rules
Use IPsec Wizard to configure rules
Description
Enter a name for a custom address policy template in the edit box. This name will be
added to the Step 1-Specify Address Template page.
Select or specify the IP addresses for which this rule will apply.
Local Address: Identifies the addresses associated with the Jetdirect print server.
Remote Address: Identifies the addresses associated with remote hosts.
HP Jetdirect IPsec Wizard
Rule 2
Rule 1
Step 1: Step 1:
Addresses1 Addresses2
Step 2: Step 2:
Services1 Services2
Step 3: Step 3:
IPsec1 IPsec2
NOTE The address policy template name must be unique for all address
policy templates.
...
ENWW