Support Info; Refresh Rate; Select Language; Security: Settings - HP 630n - JetDirect Gigabit EN Print Server Administrator's Manual

Table 4-15 USB Settings tab (continued)
Item
Preferred USB Communication
Mode
Status Page Language

Support Info

Configure links for support assistance. You can designate a support person and the phone number of
an administrator for this device, as well as URL addresses for Web-based product and technical support.

Refresh Rate

Time period (in seconds) that the diagnostic pages are automatically updated. A value of zero (0)
disables the refresh rate.

Select Language

This item is displayed if the HP Jetdirect Web pages support multiple languages. You can also select
supported languages by using the language preference settings in your browser (see your browser's
Help).
To display supported non-English languages, you must enable cookies in your browser settings.

Security: Settings

In the SECURITY section, the Settings item provides access to the following tabs: Status (default),
Wizard, Restore Defaults. The available settings depend on your particular print server model.

Status

Select the Status tab to display the current security configuration settings of the print server. The settings
displayed depend on the features supported by the print server.
84 Chapter 4 Embedded Web server (V.38.xx)
Description
Highest level of USB communication capabilities when the print server tries to establish a
communication level with the printer. If you change the current setting, unplug and then
reconnect the USB cable, or turn the print server off and then on, to activate it.
● AUTO (default) Automatically attempt to set the highest level available, starting with
multiple interface (composite) USB devices, followed by IEEE 1284.4 and Multiple
Logical Channels (MLC). If not successful, subsequent levels are attempted.
● IEEE 1284.4 Allows multiple channels of simultaneous print, scan, and status
communication, but without composite USB support. If not successful, subsequent
levels are attempted.
●
Multiple Logical Channels (MLC) An HP-proprietary protocol that allows multiple
channels of simultaneous print, scan, and status communication.
●
Bidirectional Basic two-way printer communications. Print data is sent to the printing
device, and status information is returned.
●
Unidirectional One-way printer communication from the print server to the printing
device. (This is the lowest communication level.)
The communication level set by the print server is reported on the HP Jetdirect
configuration page.
Page description language (PDL) for the HP Jetdirect configuration page data sent to the
printer. Available options include PCL, ASCII, PostScript and HPGL2.
When set to AUTO (default), the print server automatically attempts to detect and select
a language supported by the device. Typically, HP-PCL is selected if available.
ENWW