Novell Netware Parameters - HP 635n - JetDirect IPv6/IPsec Print Server Administrator's Manual

Table 8-8 IPX/SPX Configuration Information
Message
STATUS:
PRIMARY FRAME TYPE:
NETWORK
FRAME TYPE
RCVD

Novell NetWare Parameters

Information in this section of the Jetdirect configuration page is described in
NetWare Configuration
Table 8-9 Novell NetWare Configuration Information
Message
STATUS:
128 Chapter 8 HP Jetdirect Configuration Pages
Description
Indicates the current IPX/SPX protocol status.
READY: Indicates the HP Jetdirect print server is awaiting data over IPX/SPX.
DISABLED: Indicates that IPX/SPX was manually disabled.
INITIALIZING: Indicates that the print server is registering the node address or
name. An additional status message may also be displayed.
An error code and message is displayed if the print server is not ready. For more
information, see Table 8-12 Error
Specifies the frame type selection on the Jetdirect print server.
AUTO SELECT: The print server automatically senses and limits the frame type to
the first one detected.
EN_8023: Limits the frame type to IPX over IEEE 802.3 frames. All others will be
counted and discarded.
EN_II: Limits the frame type to IPX over Ethernet frames. All others will be counted
and discarded.
EN_8022: Limits the frame type to IPX over IEEE 802.2 with IEEE 802.3 frames. All
others will be counted and discarded.
EN_SNAP: Limits the frame type to IPX over SNAP with IEEE 802.3 frames. All
others will be counted and discarded.
The first column (Network) indicates the network number associated with a protocol
frame type used for communication between a server and the HP Jetdirect print
server. UNKNOWN: Indicates that the HP Jetdirect print server is still trying to
determine which network number to use.
The second column (Frame Type) identifies the frame type used with the associated
network number: EN_8023, EN_8022, EN_II, EN_SNAP. Unless a specific frame
type has been manually configured, the print server automatically determines the
protocol frame type by listening to the network data being transferred over the
network. DISABLED: Indicates that a specific frame type for that network has been
manually configured.
The third column (RCVD) indicates how many packets have been received for each
frame type.
Information. For error messages, see
Description
Indicates the current Novell NetWare configuration status.
READY: Indicates the HP Jetdirect print server is awaiting data.
DISABLED: Indicates that IPX/SPX was manually disabled.
Messages.
Table 8-9 Novell
Table 8-12 Error Messages.
ENWW