Configuring Basic Settings - Juniper NETWORK AND SECURITY MANAGER NSMXPRESS - QUICK START REV1 Quick Start Manual

Configuring Basic Settings

Copyright © 2010, Juniper Networks, Inc.
After logging into the NSMXpress Web interface, NSMXpress provides you with the
following installation options:
Configuring Basic Settings on page 9
Configuring High Availability on page 11
Advanced Options on page 14
Installing NSM Software on page 17
To install the regional server or central manager software using the minimum
requirements:
Install your NSMXpress hardware as described in "Hardware Installation" on page 4.
1.
Boot and setup your NSMXpress appliance as described in "Initial Setup Configuration"
2.
on page 6.
Enter the https://<ip>/administration URL for your appliance in a Web browser. See
3.
"Web Interface Configuration" on page 8 for details.
Log into the Web interface. The
4.
Click the link
5. Install NSM Regional Server
Regional Server window or click the
NSM Central Manager window (see Figure 3 on page 10), as the case may be.
NOTE: The "admin" user default username is admin and the password is
the one you created in Step 6 of "Boot NSMXpress" on page 7.
page opens.
System Info
(see Figure 2 on page 10) to go to the Install
Install NSM Central Manager
Configuring the NSM Software
link to view the Install
9