Displaying Address Pool Information - Juniper JUNOSE 11.0.X IP SERVICES Configuration Manual

JUNOSe 11.0.x IP Services Configuration Guide

Displaying Address Pool Information

The show ip nat pool command displays NAT address pool information. The
command output displays configuration (mask and address ranges) of all address
pools, unless you supply a specific pool name.
show ip nat pool
92
Monitoring NAT
host1# show ip nat translations verbose
Inside Inside
Prot local global
---- ----------- ---------- -----------
20.0.0.3 30.0.0.3
21.0.0.3 30.208.0.3
21.0.0.4 30.208.0.4
--- ---
--- ---
--- ---
UDP --- ---
UDP 22.0.0.4:63 30.224.0.3: ---
4097
UDP 22.0.0.3:63 30.224.0.3: ---
4096
TCP --- ---
UDP 20.50.0.3:87 30.50.0.3:8 ---
108
See show ip nat translations.
Use to display NAT address pool information.
Field descriptions
pool Name of the address pool
netmask Network prefix associated with the NAT address pool
prefix length Prefix length associated with the NAT address pool
range Address ranges used by this NAT address pool
Example 1
host1#show ip nat pool
pool: pool1 netmask: 255.255.255.0
range: 3.3.3.1 to 3.3.3.255
Outside Outside
global local
----------- ---------- --------
--- ---
--- ---
--- ---
50.0.0.3 70.0.0.3
51.0.0.3 70.208.0.3
51.0.0.4 70.208.0.4
50.50.0.3:8 70.50.0.3:8 00:03:10
7 108
---
---
50.50.0.3:8 70.50.0.3:8 00:03:10
0 008
---
prefix length: 24
Time Time
since since
creation last use
00:04:50 00:00:01
00:02:12 00:00:01
00:02:12 00:00:01
00:03:24 Never
00:01:44 00:00:01
00:01:44 00:00:01
Never
00:02:12 00:00:01
00:02:12 00:00:01
Never
00:03:35 Never