Displaying Address Pool Information - Juniper JUNOSE 11.2.X IP SERVICES Configuration Manual

JunosE 11.2.x IP Services Configuration Guide

Displaying Address Pool Information

show ip nat pool
88
21.0.0.3
21.0.0.4
---
---
---
UDP ---
UDP 22.0.0.4:63
UDP 22.0.0.3:63
TCP ---
UDP 20.50.0.3:87 30.50.0.3:8 ---
See show ip nat translations.
The show ip nat pool command displays NAT address pool information. The command
output displays configuration (mask and address ranges) of all address pools, unless
you supply a specific pool name.
Use to display NAT address pool information.
Field descriptions
pool—Name of the address pool
netmask—Network prefix associated with the NAT address pool
prefix length—Prefix length associated with the NAT address pool
range—Address ranges used by this NAT address pool
Example 1
host1#show ip nat pool
pool: pool1 netmask: 255.255.255.0
range: 3.3.3.1 to 3.3.3.255
range: 4.4.4.1 to 4.4.4.32
pool: pool2 netmask: 255.255.255.0
range: 1.1.1.1 to 1.1.1.24
range: 2.2.2.1 to 2.2.2.55
Example 2
30.208.0.3 ---
30.208.0.4 ---
--- 50.0.0.3
--- 51.0.0.3
--- 51.0.0.4
--- 50.50.0.3:8 70.50.0.3:8 00:03:10
7
30.224.0.3: ---
4097
30.224.0.3: ---
4096
--- 50.50.0.3:8 70.50.0.3:8 00:03:10
0
108
prefix length: 24
prefix length: 24
--- 00:02:12 00:00:01
--- 00:02:12 00:00:01
70.0.0.3 00:03:24
70.208.0.3 00:01:44 00:00:01
70.208.0.4 00:01:44 00:00:01
108
--- 00:02:12 00:00:01
--- 00:02:12 00:00:01
008
--- 00:03:35
Copyright © 2010, Juniper Networks, Inc.
Never
Never
Never
Never