NetComm NL20MESH User Manual page 95

Do Not Disturb (DND)
If DND is enabled, all incoming calls are rejected. DND is useful if you do not want others to disturb you.
Check with your VoIP Provider if your service supports DND.
1 Enable DND in the Voice--SIP Advanced Setting web page.
2 Pick up the receiver on the phone.
3 Dial *78 to enable DND.
4 Hang up the receiver. All calls are now rejected.
5 Pick up the phone again to disable the DND.
Call Return
For incoming calls, the DSL router remembers the number of calling party. Check with your VoIP Provider if
your service supports Call returns. You cannot call return if the caller has hidden caller ID.
1 Enable Call Return in the Voice--SIP Advanced Setting web page.
2 Press *69 to return a call.
3 Now you can make the call as if you have dialled the whole number.
Call Hold
Call hold enable you to put a call to a pending state, and pick it up in future. Check with your VoIP Provider if
your service supports Call Hold.
1 Assuming you are in a voice connection, you can press FLASH to hold current call.
2 Now you can call another party or press FLASH again to return to the first call.
Call Waiting
Call waiting allows third party to call in when you are in a voice connection. Check with your VoIP Provider if
your service supports Call Waiting.
1 Enable Call waiting in the Voice--SIP Advanced Setting web page.
2 Pick up the phone attached to the DSL router.
3 Assuming you are in a voice connection. When another call comes in, the DSL router streams a call
waiting tone to your phone, indicating another call is available.
4 Press FLASH to switch to this call and the initial call put to hold automatically.
5 Press FLASH multi-times to switch between these two calls back and forth.
Wi-Fi 6 CloudMesh Hybrid Gateway – User Guide
UG01445 v1.01 27 October 2023
95 of 123