NetComm NL20MESH User Manual page 52

F i e l d
Select a Service or
custom Server
Server IP Address
External Port Start
External Port End
Protocol
Internal Port Start
Internal Port End
Click Save/Apply to save your settings when you have finished creating virtual servers.
Wi-Fi 6 CloudMesh Hybrid Gateway – User Guide
UG01445 v1.01 27 October 2023
Figure 71 – NAT -- Virtual Server Configuration page
D e s c r i p t i o n
Select a pre-configured port forwarding rule or choose custom server to create
your own port forwarding rule.
Enter the IP address of the local server/host.
Enter the starting external port number range (when custom server is selected).
When a predefined service is selected this field will be completed automatically.
Enter the ending external port number range (when custom server is selected).
When a predefined service is selected this field will be completed automatically.
Options include TCP, UDP or TCP/UDP
Enter the starting internal port number range (when custom server is selected).
When a predefined service is selected this field will be completed automatically.
Enter the ending internal port number range (when custom server is selected).
When a predefined service is selected this field will be completed automatically.
Table 11 – NAT -- Virtual Server settings table
52 of 123