NetComm NL20MESH User Manual page 41

Bridging
When you select  Bridging mode, a summary of the settings is displayed. Click Apply/Save to commit the
settings.
Mobile broadband
The Mobile broadband page displays the current Wide Area Network service setup and allows you to
configure the gateway to connect to a mobile (cellular) network for primary Internet access.
Only one Mobile Broadband can be set up at a time. You can alter the setup by clicking the Edit button, or
Remove the setup and Add a new service.
Insert a SIM card in Nano SIM format into the device's SIM Card Slot and click the Add button to configure the Mobile Broadband
Note –
service.
F i e l d D e s c r i p t i o n
Modem status In the top left corner above the start of the table is the Modem status indicator:
indicator dialling..., CONNECTED, Manual Dialled, undialing..., DISCONNECT, SIM CARD INVALID
OR NOT SIM CARD!, etc.
Interface The interface of the mobile connection.
Wi-Fi 6 CloudMesh Hybrid Gateway – User Guide
UG01445 v1.01 27 October 2023
Figure 59 – Enter Bridging WAN service summary
Figure 60 – Mobile Broadband setup
41 of 123