NetComm NL20MESH User Manual page 101

Management
Settings
The Settings screens allow you to back up, retrieve and restore the default settings of your router. It also
provides a function for you to update your router's firmware.
Backup
This feature allows you to take a snapshot of the current configuration of your gateway so that you can roll
back to the current configuration if you plan to make changes. All configuration files are encrypted by
default.
To back up the current configuration:
1 (Optional) If you wish to change the encryption key, enter an encryption key (password) in the
Configurations Encryption Key field. Click on the Apply/Save button.
2 Click on the Backup Settings button to save the current configuration settings. The configuration file is
saved via your browser to the downloads folder configured in your browser.
To restore the configuration on your CloudMesh Gateway, see the Update Settings section below.
Update Settings
Use this feature to restore a previously saved configuration using the Backup feature (described above). If
you are restoring the configuration to a new CloudMesh Gateway or if you previously changed the
encryption key to the configuration file and then factory reset the device, you must first enter the encryption
key in the Configurations Encryption Key field in the Settings – Backup page, and click on Apply/Save. To
restore a saved configuration, click on the Browse button and locate a file that you have saved to restore a
previous configuration. Click on the Update settings button to upload the selected file. Please allow up to 5
minutes for the system to apply the configuration and reboot.
Wi-Fi 6 CloudMesh Hybrid Gateway – User Guide
UG01445 v1.01 27 October 2023
Figure 124 – Settings – Backup page
Figure 125 – Settings – Update Settings page
101 of 123