NetComm NL20MESH User Manual page 102

Restore Default
This feature resets all the settings of the gateway to the factory default settings. When you select this option,
the settings will be erased and the gateway reboots. Please allow up to 2 minutes for the gateway to restart.
System Log
The System log page allows you to view the log of the gateway and configure the logging level also. To view
the system log, click the View System Log button.
To configure the system log, click the Configure System Log button. You can send system log data to a
remote server by selecting the "Both", or "Remote" option for the Mode setting. The gateway will prompt you
for a server IP and port. To receive the system log data remotely, you must run some third-party syslog
software.
Wi-Fi 6 CloudMesh Hybrid Gateway – User Guide
UG01445 v1.01 27 October 2023
Figure 126 – Settings – Factory Reset page
Figure 127 – Management – View System Log
Figure 128 – Management – Configure System Log
102 of 123