NetComm NL20MESH User Manual page 60

To permanently remove a Chain Rule from the list, select
Remove button to delete the rule from the list. Multiple rules can be selected and deleted at the same time.
Click the Add button to create a new Firewall rule, see next section.
Firewall – Add
Create individual rules for inclusion in the Chain Rules table.
Select Enabled to create a rule that can be used for a firewall.
F i e l d
Chain Name
Source Interface
Dest Interface
Action
Wi-Fi 6 CloudMesh Hybrid Gateway – User Guide
UG01445 v1.01 27 October 2023
Figure 84 – Advanced – Firewall – Add
D e s c r i p t i o n
Add a meaningful name.
Select the interface for the source IP address or All Interface from the drop-down
menu.
Select the interface for the destination IP address or All Interface from the drop-
down menu.
Select Drop to prevent the connection of any addresses included in the rule
definition.
Select Accept to allow the connection of any addresses included in the rule
definition.
in the rule's Remove column and then click the
60 of 123