NetComm NL20MESH User Manual page 116

15 Enter a name of 15 characters or less to reflect the device that will have low priority QoS e.g.
PC2LowPriority.
16 Set the Enable option to Enable.
17 Set the Interface to atm0
18 Enter a Precedence. For the lowest priority, set it to 3. For the highest priority use 1.
19 Set the DSL Latency as Path0.
20 Click the Save/Apply button.
High Priority QoS Classification
1 Select Advanced Setup > Quality of Service > QoS Classification.
Wi-Fi 6 CloudMesh Hybrid Gateway – User Guide
UG01445 v1.01 27 October 2023
Figure 147 – QoS – Queue Configuration 2
116 of 123