NetComm NL20MESH User Manual page 35

F i e l d D e s c r i p t i o n
Interface This field shows the interface name.
VPI This field shows the Virtual Path Identifier (VPI) value. For most Australian
connections the VPI is 8, for most New Zealand connections the VPI is 0. Please refer
to your ISP for correct value.
VCI This field shows the Virtual Channel Identifier (VCI) value. For most Australian
connections the VCI is 35, for most New Zealand connections the VCI is 100. Please
refer to your ISP for correct value.
DSL Latency The value of the DSL Latency.
Category This field shows the ATM service classes.
Peak Cell Rate The maximum number of cells that may be transferred per second over the ATM
(cell/s) interface.
Sustainable Cell An average, long-term cell transfer rate on the ATM interface.
Rate (cell/s)
Max Burst Size The maximum allowable burst size of cells that can be transmitted contiguously on
(bytes) the ATM interface.
Min Cell Rate The minimum allowable rate at which cells may be transferred on the ATM interface.
(cell/s)
Link Type This field shows the type of link in use.
Connection Mode This field shows the selected mode of connection.
IP QoS This field shows the status of the Quality of Service (QoS) function.
MPAAL This displays data related to QoS Queue priority and algorithm.
Prec/Alg/Wght
Remove Check  the box in this field and click Remove to permanently delete the ATM
configuration.
To add an ATM interface, click the Add button. Enter the details as required by your Internet Service Provider
and click the Apply/Save button.
Wi-Fi 6 CloudMesh Hybrid Gateway – User Guide
UG01445 v1.01 27 October 2023
Table 4 – DSL ATM Interface Configuration settings table
35 of 123