NetComm NL20MESH User Manual page 89

Busy Call Forwarding
Number
No Answer Call
forwarding number
Forward On "busy"
Forward On "No
Answer"
MWI (Message Waiting
Indicator)
Anonymous Call
Blocking
Anonymous Calling
Anonymous calling
mode
DND (Do Not Disturb)
Enable T38 Redundancy
Support
Enable VBD redundancy
support
Enable VAD support
Enable RTCP Flow
Control
Enable Echo
Cancellation
Enable # To ASCII
RFC2198 Payload Value
(range 97-127)
Registration Expire
Timeout
Session Expire Time
Min Session Expire Time
VoIP DialPlan Setting
DSCP for SIP
Wi-Fi 6 CloudMesh Hybrid Gateway – User Guide
UG01445 v1.01 27 October 2023
Enter the phone number to forward a call to if it arrives while the line is busy.
Enter the phone number to forward a call to if the call is not answered.
Select this option if your VoIP Service Provider has enabled Call Forwarding on
your SIP account and you wish to use this feature.
Select this option if your VoIP Service Provider has enabled Call Forwarding on
your SIP account and you wish to use this feature.
Select this option if your VoIP Service Provider has enabled MWI (Message
Waiting Indicator) on your SIP account and you wish to use this feature.
Select this option if your VoIP Service Provider has enabled Anonymous Call
Blocking on your SIP account and you wish to use this feature.
Select this option if your VoIP Service Provider has enabled Anonymous Calling
on your SIP account and you wish to use this feature.
When set to Display anonymous, the modem hides your caller ID. When set to
All anonymous, the modem hides both caller ID and the SIP URL of the
originating call.
Select this option if your VoIP Service Provider has enabled DND (Do Not
Disturb) on your SIP account and you wish to use this feature.
Select this function if you wish to send or receive faxes via VoIP and have a fax
machine capable of using the T38 fax over VoIP protocol.
Select this checkbox to use the feature.
Enables the Voice Activated Detection function of the modem. When enabled,
no data is transmitted during periods of silence or low volume, reducing the
data usage.
Select this checkbox to use the feature.
Select this checkbox to use the feature.
Select this checkbox to use the feature.
Enter the RFC2198 payload value that the valid range is 96 ~ 127.
Enter the registration expire timeout.
The interval of dialog refreshing time.
The minimum interval of dialog refreshing time.
Set the VoIP dial plan. If user-dialled number matches it, the number is
processed by the VoIP router immediately.
Set the DSCP QoS tagging for Session Initiation Protocol. You can select it from
the drop-down list.
89 of 123