NetComm NL20MESH User Manual page 51

LAN VLAN Setting
This page allows you to specify a LAN port to apply VLAN tagging to.
Select the LAN port using the drop-down menu, then click the Add button. Enter the VLAN ID and in the Pbits
field, enter a value from 0-7 indicating the priority bits that dictates the priority of the VLAN.
Click Apply/Save when you have finished.
NAT
Virtual Servers
Virtual Servers (also commonly referred to as port forwarding) allow you to direct incoming traffic from the
WAN side to the Internal network host with a private IP address on the LAN side.
Click the Add button to add a virtual server.
Wi-Fi 6 CloudMesh Hybrid Gateway – User Guide
UG01445 v1.01 27 October 2023
Figure 69 – Specify a LAN port for VLAN tagging
Figure 70 – NAT -- Virtual Server list
51 of 123