NetComm NL20MESH User Manual page 78

changing the SSID of one of the bands, it is ideal to set the other band to have the same SSID and password
for this reason.
If you experience issues when both networks have the same name, consider setting separate names for the
2.4GHz and 5GHz bands.
Note – Changing the SSID and password names so that they are different for each band will stop the WiFi AutoPilot from being able
to steer your clients between bands.
Security
The CloudMesh Gateway supports all encryptions within the 802.11 standard. The factory default is WPA2-
PSK. The CloudMesh Gateway also supports: WPA, WPA-PSK, WPA2-PSK, or WPA3-SAE
You can also select to disable WPS mode.
The following parameters are available:
P a r a m e t e r D e f i n i t i o n
Wireless Select the SSID to apply the security settings to.
Interface
Network Select the Wireless security type to use with the wireless network.
Authentication
The default is: WPA2-PSK.
The CloudMesh Gateway also supports: WPA, WPA-PSK, WPA2-PSK, or WPA3-SAE
WPA Encryption Select the type of encryption to use on the wireless network.
WPA passphrase Enter the security key to use with the wireless network.
Protected Select whether the protected management frames should be Off, Capable or
Management Required.
Frames
Wi-Fi 6 CloudMesh Hybrid Gateway – User Guide
UG01445 v1.01 27 October 2023
Figure 111 – Wireless Security
78 of 123