NetComm NL20MESH User Manual page 34

b Click the Next button. A summary of the settings is displayed.
c Click the Apply/Save button when you have entered the required details. A WAN information
table is displayed.
The setup is complete.
Advanced setup
This section provides a variety of options for configuring the gateway for advanced functions. These include
settings related to the WAN service, Local Area Network (LAN), Network Address Translation (NAT), MAC
filtering, Parental control, Firewall, Quality of Service (QoS), Routing and more. In most cases, you will not
need to modify settings under the Advanced setup tree and we recommend that you do not change many of
the settings unless you are sure of the effect that the changes will have, and have a backup of your current
working configuration.
Layer2 Interface
ATM Interface
The ATM (Asynchronous Transfer Mode) interface page shows the settings of all available DSL ATM
interfaces. The ATM interface is used for ADSL connections.
Wi-Fi 6 CloudMesh Hybrid Gateway – User Guide
UG01445 v1.01 27 October 2023
Figure 46 - WAN setup summary
Figure 47 - WAN info table
Figure 48 – DSL ATM Interface list
34 of 123