NetComm NL20MESH User Manual page 11

Fibre to the Curb (FTTC)
Connecting to the Wi-Fi 6 CloudMesh Hybrid
Gateway
There are two ways that you can connect to Wi-Fi:
Using your smartphone or tablet camera, scan the QR code on the gateway's label or Wi-Fi Security
⚫
Card. Follow your device's instructions to connect to Wi-Fi.
OR
Perform a manual network scan from your device and select the gateway's network name, then enter
⚫
the Wi-Fi Password. This information can be found on the Wi-Fi 6 CloudMesh Hybrid Gateway's label
and on the included Wi-Fi Security Card.
Wi-Fi 6 CloudMesh Hybrid Gateway – User Guide
UG01445 v1.01 27 October 2023
Figure 1 - Connecting with Wi-Fi
11 of 123