NetComm NL20MESH User Manual page 29

c Click on the Next button. A summary of the settings is displayed.
d Click the Apply/Save button when you have entered the required details. A WAN information
table is displayed.
The setup is complete.
Bridging
a Select the correct VLAN option for your connection.
For New Zealand customers, the requirement for VDSL is VLAN tag 10.
If you are not sure of the tagging requirement for your connection, please contact your ISP.
Wi-Fi 6 CloudMesh Hybrid Gateway – User Guide
UG01445 v1.01 27 October 2023
Figure 29 – IPoE information
Figure 30 - WAN setup summary
Figure 31 - WAN info table
Figure 32 – Select VLAN option for VDSL connection
29 of 123