WPS/LED button
Power button
Safety and product care
Your router is an electronic device that sends and receives radio signals. Please take the time to read this list
of precautions that should be taken when installing and using the router.
Do not disassemble the router. There are no user-serviceable parts.
⚫
Do not allow the router to come into contact with liquid or moisture at any time. To clean the device,
⚫
wipe it with a damp cloth.
Do not restrict airflow around the device. This can lead to the device overheating.
⚫
Do not place the device in direct sunlight or in hot areas.
⚫
Transport and handling
When transporting the gateway, we recommend returning the product in its original packaging. This helps to
reduce the risk of damage to the product.
Attention – In the event the product needs to be returned, ensure it is securely packaged with appropriate padding to prevent
damage during courier transport.
Placement of your CloudMesh Gateway
The wireless connection between your CloudMesh Gateway and your wireless devices will be strong when
they are in close proximity and have direct line of sight. As your client device moves further away from the
CloudMesh Gateway or solid objects block direct line of sight to the router, your wireless connection and
performance may degrade. This may or may not be directly noticeable and is greatly affected by the
individual installation environment.
If you have concerns about your network's performance that might be related to range or obstruction
factors, try moving the computer to a position between three to five metres from the CloudMesh Gateway to
see if distance is the problem.
Wi-Fi 6 CloudMesh Hybrid Gateway – User Guide
UG01445 v1.01 27 October 2023
This is a multifunctional button that will trigger the Wi-Fi Protected Setup (WPS)
function when held down for approximately three (3) seconds and toggle the
LED indicators on or off when held for approximately six (6) seconds.
Toggles the power on and off.
Table 3 - Side buttons
18 of 123
Need help?
Do you have a question about the NL20MESH and is the answer not in the manual?