NetComm NL20MESH User Manual page 109

Services Control
The Service Control List (SCL) allows you to enable or disable your Local Area Network (LAN) or Wide Area
Network (WAN) services by ticking the checkbox as illustrated below and specifying the service port assign to
the service.
The following access services are available: FTP, HTTP, ICMP, SAMBA, SNMP, SSH, TELNET, and TFTP.
Click the Apply/Save button after making any changes to continue.
Note – You should change your default password, before enabling a WAN service.
LED Control
This feature allows you to turn the LED indicators on the front panel of the gateway on or off.
Wi-Fi 6 CloudMesh Hybrid Gateway – User Guide
UG01445 v1.01 27 October 2023
Figure 137 – Service Control List (SCL)
Figure 138 - LED Control setting
109 of 123