NetComm NL1901ACV Backup And Restore Configuration Manual

Hide thumbs Also See for NL1901ACV:

Download this manual

Backup and Restore Configuration Guide

Back up your settings

This guide provides you with instructions to back up and restore your router configuration.

It is recommended to make a backup of the current working configuration in case you lose your settings or need to

perform a factory reset (i.e. reset default settings).

Connect a computer and the NF18ACV using an Ethernet cable. (A yellow Ethernet cable was provided with

your NL1901ACV).

Open a web browser (such as Google Chrome or Mozilla Firefox), type following address into the address

bar and press Enter.

http://192.168.20.1

Enter the following credentials in the User Name and Password fields:

admin

User Name:

Password:

The serial number found on the label on the back of the device

Click the Login button.

Note – If no authentication prompt is displayed or you see a request time out message, refer to the What if I cannot access Web User

Interface guide from FAQs section.

NL1901ACV FAQs – Backup and Restore Configuration Guide

AA00000 v. 1.1 March 2019

NL1901ACV FAQs

1 of 2

Page 1 Note – If no authentication prompt is displayed or you see a request time out message, refer to the What if I cannot access Web User Interface guide from FAQs section. NL1901ACV FAQs – Backup and Restore Configuration Guide 1 of 2 AA00000 v.
Page 2 A file named “ ” will be downloaded to your Download directory. Move that file to any of your preferred directory to keep it safe. NL1901ACV FAQs – Backup and Restore Configuration Guide 2 of 3 AA00000 v. 1.1 March 2019...
Page 3 Once the file is selected the name of the file will appear to the right of the Choose file button. Click on the Update Settings button to restore the saved configuration settings to your NL1901ACV. NL1901ACV will update the settings and restart. The process will take around 1-2 minutes.