NetComm NL20MESH User Manual page 31

2 Select the WAN mode for your Internet connection as specified by your Internet Service Provider (ISP).
Click the Next button.
PPPoE
a Select the correct VLAN option for your connection.
For New Zealand customers, the requirement for most ISPs fibre connections is VLAN tag 10.
If you are not sure of the tagging requirement for your connection, please contact your ISP.
Click the Next button.
b Enter the User ID and Password for the connection.
c Click on the Next button. A summary of the settings is displayed.
Wi-Fi 6 CloudMesh Hybrid Gateway – User Guide
UG01445 v1.01 27 October 2023
Figure 36 – Select WAN mode for Ethernet WAN connection
Figure 37 – Select VLAN option for VDSL connection
Figure 38 - PPPoE User ID and Password
31 of 123