NetComm NL20MESH User Manual page 56

MAC Filtering
The CloudMesh Gateway offers the ability to use MAC Address filtering on ATM PVCs. You can elect to block
or allow connections based on MAC Address criteria. The default policy is to allow all connections.
Click Add to enter a new MAC Address filter.
1 Enter the Protocol type to which the filter should apply.
2 Enter the Source and Destination MAC Address.
3 Enter the Frame Direction of the traffic to filter.
4 Select the WAN interface to which the filter should apply.
Wi-Fi 6 CloudMesh Hybrid Gateway – User Guide
UG01445 v1.01 27 October 2023
Figure 76 – Security – MAC Filter list
Figure 77 – Security – MAC Filter settings
56 of 123