NetComm NL20MESH User Manual page 110

Update Firmware
This page is used to manually update your gateway's firmware. Use caution with this feature. Some ISPs may
have their own custom firmware for the Wi-Fi 6 Gateway and manage this for you remotely. In this situation,
manually updating the firmware yourself could cause some problems, so we recommend that you consult
with your ISP first.
Generic firmware images are occasionally updated and hosted at
1 Click the Choose File button to locate the image file.
2 Click the Update Firmware button once to upload and install the file.
The gateway performs the firmware installation and reboots on completion.
Reboot
This option reboots the CloudMesh Gateway. Please allow up to 5 minutes for device to reboot.
Note 1. – It may be necessary to reconfigure your TCP/IP settings to adjust for the new configuration. For example, if you disable the
Dynamic Host Configuration Protocol (DHCP) server you will need to apply Static IP settings to your Network interface card (NIC).
Note 2. – If you lose all access to your web user interface, simply press and hold the reset button on the rear panel for 10 seconds
to restore default settings
Wi-Fi 6 CloudMesh Hybrid Gateway – User Guide
UG01445 v1.01 27 October 2023
Figure 139 – Update Firmware page
Figure 140 – Reboot button
http://support.netcommwireless.com/
110 of 123