Status - Advanced Navigation Certus OEM Reference Manual

Certus Reference Manual • Configuring and Monitoring Certus

8.1.2.4 Status

The Status shows the current status of Certus as reported by sections
10.4.10 Raw GNSS Packet. (ID#29).
Note: The following Status flags do not update for Certus units with a Trimble BD992 GNSS Receiver.
These flags are only applicable to u-blox GNSS Receivers: GNSS 2, Antenna 1 disconnected, Antenna
2 disconnected, Antenna 1 short, Antenna 2 short
Figure 25: Certus Web UI Status Page
v2.4
10.4.1 System State Packet
Page 58
(ID#20) and
2024-12-17