Advanced Navigation Certus OEM Reference Manual page 121

Certus Reference Manual • Configuring and Monitoring Certus
8.2.7.14 Gimbal
The Gimbal configuration dialogue is only used in gimbal specific applications.
Contact support@advancednavigation.com
Figure 89: Manager Gimbal Dialogue
8.2.7.15 Ethernet Settings
The Ethernet Settings dialogue allows the user to enable or disable the DHCP Client. When the DHCP Client is
disabled you need to enter the TCP/IP settings if the user wishes to access the web UI. If the user is connecting
to Certusvia the primary port these settings can be ignored. The default is for the Ethernet mode to be set to
DHCP.
Figure 90: Manager Ethernet Settings Dialogue
v2.4
for more information on using Certus inside a gimbal.
Page 108 2024-12-17