Advanced Navigation Certus OEM Reference Manual page 86

Certus Reference Manual • Configuring and Monitoring Certus
The source of the corrections data can be either your own base station, configured as an NTRIP Caster, or a
third-party service. Either way, you will need the login details for connecting to and authenticating with the
NTRIP Caster, and identifying the nearest mountpoint.
These steps are required:
1. Select Enabled.
2. For Host/Server, enter the NTRIP Caster address.
3. For Port, enter the NTRIP Caster port numbe. This is usually 2101.
4. Click Save.
5. Click Get Mountpoints.
6. Select your mountpoint from the Mountpoint drop down list, being mindful that the distance should not
exceed 50km.
7. Enter your username in the Username box.
8. Enter your password in the Password box.
9. Click Save.
To disconnect from the NTRIP Caster unselect Enabled and click Save.
v2.4 Page 73 2024-12-17