Vessel Motion; External Data Selection - Advanced Navigation Certus OEM Reference Manual

Certus Reference Manual • Configuring and Monitoring Certus

8.1.2.11 Vessel Motion

This page displays the vessel motion (heave, surge, sway) at 4 reference points. Reference point offsets for
vessel motion can be configured on the
Figure 32: Certus Web UI Vessel Motion Page

8.1.2.12 External Data Selection

This jump page is used to open time-based data graphs for each external source supported.
External sources need to be connected and configured appropriately for the corresponding packet to report
valid data. For more information, refer to
v2.4
8.1.3.9 Reference Point Offsets
9.5 External Data.
Page 64
page.
2024-12-17